Adjusting Copying Options
Phaser® 8510/8560MFP Multifunction Product
4-17
Using Blank Separation Pages
When you create copies on transparencies or other special media, you can insert blank
separation pages between each copy.
To turn on blank separation pages:
1. Select the tray that contains the media you want to use for the copies.
2. On the control panel, press the Copy button.
3. Select
Blank Separators, and then press the OK button.
4. Select
On to insert a blank separation page between every page of the copy job. The Off
option does not insert separation pages between your copies.
5. Select the tray to use for the blank separators, and then press the OK button.
Note: The factory default is Off.
To Next Page
Loading...
Need help?
General
