Xerox Phaser 8560MFP User Manual

Managing Fax Functions
Phaser® 8510/8560MFP Multifunction Product
6-23
Inserting Pauses in Fax Numbers
Some fax numbers require one or more pauses during the dialing sequence.
To insert pauses in a fax number:
1. On the control panel, press the Fax button.
2. Select
Fax To, and then press the OK button.
3. When entering a fax number using the alphanumeric keypad, press the Pause button to
insert a pause (represented by a comma) in the fax number where appropriate.
4. Press the Start button to send the fax.
Changing the Pause Setting
To change the pause setting:
1. On the control panel, press the System button.
2. Select
Troubleshooting, and then press the OK button.
3. Select
Fax Problems, and then press the OK button.
4. Select
Dial Delay, and then press the OK button.
5. Follow the onscreen prompts to select a new time setting for pause entries, and then press
the OK button.
Note: The factory default is three seconds.

Xerox Phaser 8560MFP Specifications

General

Brand	Xerox
Model	Phaser 8560MFP
Category	All in One Printer
Language	English