Printing on Specialty Media
Phaser® 8510/8560MFP Multifunction Product
3-41
Printing Labels
Labels can be printed from any tray.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/supplies
.
See also:
Paper Sizes and Weights for Tray 1 on page 3-7
Paper Sizes and Weights for Tray 2, 3, or 4 on page 3-8
Guidelines
■ Do not use vinyl labels.
■ Print only on one side of the sheet of labels.
■ Do not use any sheet where labels are missing; it may damage the system.
■ Store unused labels flat in their original packaging. Leave the sheets of labels inside the
original packaging until ready to use. Return any unused sheets of labels to the original
packaging and reseal it.
■ Do not store labels in extremely dry or humid conditions or extremely hot or cold
conditions. Storing them in extreme conditions may cause print quality problems or cause
them to jam in the system.
■ Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to
curl and jam the system.
To Next Page
Loading...
Need help?
General
