Xerox Phaser 8560MFP - Resetting Fax Options to the Factory Default

Solving Fax Problems
Phaser® 8510/8560MFP Multifunction Product
6-26
Resetting Fax Options to the Factory Default
When you reset fax settings, all settings are returned to factory default values. Any incoming
or outgoing faxes are cancelled or deleted.
Note: Speed Dial entries and the Country and Line ID settings are not affected when you
select the
Reset Fax option.
To reset fax options to factory default settings:
1. On the control panel, press the System button.
2. Select
Troubleshooting, and then press the OK button.
3. Select
Fax Problems, and then press the OK button.
4. Select
Reset Fax, and then press the OK button.
5. Select
Reset Fax Now, and then press the OK button.