Overview of Basic Steps
Phaser® 8510/8560MFP Multifunction Product
3-2
Overview of Basic Steps
1. Load paper in the tray.
2. If you are prompted by the control panel, either confirm the paper type and size or change
it as required.
3. From the software application, access the Print dialog box, and then select printing
options in the printer driver.
4. Send the job to the system from the software application’s Print dialog box.
See also:
Loading Paper on page 3-9
Selecting Printing Options on page 3-20
Printing on Specialty Media on page 3-29
To Next Page
Loading...
Need help?
General
