Loading Paper
Phaser® 8510/8560MFP Multifunction Product
3-13
Using Manual Feed
If you are using paper, such as letterhead, and do not want others to use it by mistake, you can
set the system to prompt you when it is time to load the paper for your print job.
Windows
To select manual feed using Windows 2000, Windows XP, or Windows Server 2003:
1. In the Windows printer driver, click the Paper/Quality tab.
2. Select Force Printing from a Specific Tray, and then select Tray 1 from the list.
3. Select Manual Feed, and then click OK to save the driver settings.
4. Submit your print job.
5. When prompted by the control panel, remove the paper from Tray 1.
6. Load the appropriate paper for your job into the tray.
Macintosh
Follow the steps below to select manual feed for Macintosh OS 9.x, or Macintosh OS X,
version 10.2 and higher.
Macintosh OS 9.x
To select manual feed using Macintosh OS 9.x:
1. In the Print dialog box, select the General pane.
2. Select Manual Feed in the All pages from pop-up menu.
3. Submit your print job.
4. When prompted by the control panel, remove the paper from Tray 1.
5. Load the appropriate paper for your job into the tray.
Macintosh OS X, Version 10.2 and Higher
To select manual feed using Macintosh OS X, version 10.2 or higher:
1. In the Print dialog box, select Paper Feed from the drop-down list.
2. Select Manual Feed in the All pages from drop-down list.
3. Submit your print job.
4. When prompted by the control panel, remove the paper from Tray 1.
5. Load the appropriate paper for your job into the tray.
See also:
Loading Paper in Tray 1 on page 3-9
To Next Page
Loading...
Need help?
General
