Xerox Phaser 8560MFP User Manual

Selecting Fax Options
Phaser® 8510/8560MFP Multifunction Product
6-14
Selecting Fax Options
This section includes:
■ Setting the Fax Destination on page 6-14
■ Setting the Fax Resolution on page 6-15
■ Selecting the Original Size on page 6-15
■ Selecting Auto Suppression on page 6-15
■ Selecting the Starting Rate on page 6-16
■ Delay Sending a Fax on page 6-16
Setting the Fax Destination
To set the destination for the current fax:
1. On the control panel, press the Fax button.
2. Select
Fax To, and then press the OK button.
3. Select one of the following options, and then press the OK button:
■ Fax Number: Enables you to enter a fax number or individual or group speed dial
directory number using the alphanumeric keypad.
■ Individual: Enter the number assigned to the individual in the individual
directory, and then press the Start button.
■ Group: Press the # button, enter the number assigned to the group in the group
directory, and then press the Start button.
■ Speed Dial: Enables you to select an individual or group entry.
■ Send List: Enables you to send the fax to a list of selected recipients.
Note: Press any key on the alphanumeric keypad to view the Fax Number item.
See also:
Sending a Fax from the System on page 6-2
Adding an Individual on page 6-6
Adding a Group on page 6-8
Faxing Multiple Recipients Using Send List on page 6-12

Xerox Phaser 8560MFP Specifications

General

Brand	Xerox
Model	Phaser 8560MFP
Category	All in One Printer
Language	English