Loading Paper
Phaser® 8510/8560MFP Multifunction Product
3-12
■ 2-sided printing: Insert side one faceup with the bottom of the page entering the
system first.
4. Adjust the paper guides to fit the paper loaded in the tray.
5. On the control panel, press the OK button to use the paper size and type displayed as the
current setup, or change the paper size and type:
a. Select
Change setup, and then press the OK button.
b. Select the paper size, and then press the OK button.
c. Select the paper type, and then press the OK button.
8560-110
8560-130
To Next Page
Loading...
