Loading Paper
Phaser® 8510/8560MFP Multifunction Product
3-11
3. Insert paper or other media into the tray.
■ Single-sided printing: Insert the side to be printed facedown with the top of the page
entering the system first.
Note: When using pre-punched paper, adjust the print margins to accommodate the holes.
Printing over the holes may cause ink to transfer onto subsequent pages. A minimum
margin of 19 mm (0.75 in.) is recommended.
■ Side-flap envelopes: Insert envelopes with the flap side up and the flap toward the
left side of the tray.
8560-109
8560-019
To Next Page
Loading...
