Xerox Phaser 8560MFP User Manual

Adding Individual and Group Speed Dial Entries
Phaser® 8510/8560MFP Multifunction Product
6-9
Removing an Entry from a Group
To remove an entry:
1. On the control panel, press the Speed Dial button.
2. Select
Group, and then press the OK button.
3. Select the group you want to change from the list displayed, and then press the OK button.
4. To remove an individual from this group:
a. Select
Remove Individual, and then press the OK button. This option appears when
there are one or more individuals in this group.
b. Select an individual from the list displayed, and then press the OK button.
c. Repeat the above steps to continue removing individuals from the group.
5. To remove a group from this group:
a. Select
Remove Group, and then press the OK button. This option appears when there
are one or more groups in this group.
b. Select a group from the list displayed, and then press the OK button
c. Repeat the above steps to continue removing groups from the group.
6. When you have finished removing individuals and other groups, select
Done, and then
press the OK button.
See also:
Sending a Fax from the System on page 6-2
Setting the Fax Destination on page 6-14

Xerox Phaser 8560MFP Specifications

General

Brand	Xerox
Model	Phaser 8560MFP
Category	All in One Printer
Language	English