Solving Print-Quality Problems
Phaser® 8510/8560MFP Multifunction Product
7-7
3. If the problem continues:
a. Open the door on the side of the system and remove the maintenance kit.
b. Wipe the plastic wiper blade with a lint-free cloth.
c. Replace the maintenance kit and close the door.
Note: Smudges or smears may appear if you print on side two of pre-printed paper, but do not
select 2nds Side as the paper type. Select the
2nd Side option on the control panel and in the
printer driver.
See also:
Manual 2-Sided Printing on page 3-27
Cleaning the Maintenance Kit Wiper Blade on page 8-15
To Next Page
Loading...
