Xerox Phaser 8560MFP - Page 275

Index
Phaser® 8510/8560MFP Multifunction System
Index-9
options
additional trays, 1-7
hard drive, 1-7
memory, 1-7
printing, 3-20
system, 1-7
ordering supplies, 8-23, 8-24
original size
scanning template setup, 5-22
setting for faxes, 6-15
setting for scanning, 5-21
setting up a scan template, 5-22
originals
1-sided or 2-sided scanning, 5-19
2-sided, 4-5
laser
adjusting scan sensitivity, 4-10
printed on thin paper, 5-18, 6-15
using the prescan glass option, 4-9
output
adjusting copies, 4-16
P
packing the system, 8-34
paper
custom sizes, 3-52
damaging to the system, 3-5
envelopes, 3-35
glossy, 3-47
labels, 3-41
loading in the paper trays, 3-9
loading the duplex automatic document
feeder, 3-4
printing on specialty media, 3-29
storage guidelines, 3-5
supported, 3-3
supported for Tray 1, 3-7
supported for Tray 2, 3, or 4, 3-8
supported sizes and weights, 3-6
thin originals, 5-18, 6-15
transparencies, 3-29
types, 3-3
unacceptable media types, 3-5
usage guidelines, 3-4
using manual feed, 3-13
paper jams, 9-2
exit cover, 9-2
exit path, 9-8
finisher, 9-18
front cover, 9-11
paper release blades
cleaning, 8-11
parts of the system, 1-2
password
adding for scanning to your
computer, 5-33
creating for a private folder, 5-34
enabling secure faxes, 6-18
printing or clearing secure faxes, 6-19
using for color copies, 4-20
pauses
changing the time setting for pauses, 6-23
inserting in fax numbers, 6-2, 6-23
PCL, 2-10
fonts, 1-5
PhaserSMART technical support, 1-14, 9-28
photo print-quality mode, 7-2
posters, 4-14
PostScript, 2-10
fonts, 1-5
predominate light stripes, 7-10
preparing the system for shipment, 8-27
pre-printed paper, 3-9, 3-27
prescanning originals, 4-9
Press Match, 7-4
TekColor correction, 7-4
preventing junk faxes, 6-21
print
adjusting color, 7-4
setting print job interrupt option, 4-20
print job
interrupt option, 4-20
selecting a print-quality mode, 7-2
print quality
modes, 7-2