Printing on Specialty Media
Phaser® 8510/8560MFP Multifunction Product
3-39
3. Adjust the paper guides to fit the envelopes.
■ Length guide: Press the sides, and then slide the guide until the arrow on the guide
points to the appropriate paper size imprinted on the bottom of the tray. When
properly positioned, the guide clicks into place.
■ Width guides: Slide the width guides until the arrows on the guides point to the
appropriate paper size labeled on the bottom of the tray. When properly positioned,
the guides click into place.
Note: When the paper guides are adjusted correctly, there may be a small space between
the envelopes and the guides.
8560-034
8560-035
To Next Page
Loading...
