Printing on Specialty Media
Phaser® 8510/8560MFP Multifunction Product
3-46
4. Insert the tray into the tray slot, and then push it completely into the system.
5. On the control panel, press the System button.
a. Select
Paper Tray Setup, and then press the OK button.
b. Select
Tray 2 Paper, Tray 3 Paper, or Tray 4 Paper, and then press the OK button.
c. Select
Use current setup if Labels is displayed as the current paper type, or change
the paper type:
■ Select Tray 2 Paper Type, Tray 3 Paper Type, or Tray 4 Paper Type, and then
press the OK button.
■ Select Labels from the list displayed, and then press the OK button.
6. In the printer driver, select either Labels as the paper type or the appropriate tray as the
paper source.
8560-041
To Next Page
Loading...
