Xerox VersaLink B7035

Maintenance
186 Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
User Guide
5. Check inside the finisher for any loose staples and remove them.
6. Pinch both sides of the staple pack and remove the staple pack from the cartridge.
7. In
sert the front side of the new staple pack into the staple cartridge, then push the rear side into th
e
cartridge.
8. G
rasp the staple cartridge by the orange handle, then insert it into the stapler assembly. Push th
e
s
taple cartridge in until it clicks.
9. C
lose the finisher front door.