Getting Started
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 39
User Guide
Installing the Wireless Network Adapter
The optional wireless network adapter plugs in to the back of the control board. After the adapter is
installed, and wireless networking is enabled and configured, the adapter is able to connect to a wireless
network.
To install the Wireless Network Adapter:
1. Power off the printer.
a. At the control panel, press the Power/Wake button, then touch Power Off.
b. O
pen the front door, then press the power switch off.
C
AUTION: Do not unplug the power cord while the printer powers down.
2. Remove the packaging from the Wireless Network Adapter.
To Next Page
Loading...
