Xerox Versant 2100 Press - Exiting the System Administrator Mode; System Administrator Options

Exiting the System Administrator Mode
To log out, you must be at one of the top level menu screens.
1. Press the Log In/Out button.
2. When the Logout screen appears, Press Yes.
System Administrator Options
At the press Control Panel, the System Administrator mode allows setting and changing
the following system features:
• Default Language used
• Administrator password
• Paper tray priority settings
• Screen display options
• Date and time on the press
• Connectivity and network settings
• Power saver settings
• Attention sounds
• Reporting output
• Output Devices
• Image quality options
• Security settings
• Setting up Remote Services
• DFA Finishing Profiles
The following functions are set at the print server only through the Stock Library Manager.
Refer to the Stock Library Manager Online Help for more information.
• Paper Tray settings such as stock size and type
• Paper Curl Correction
• Running test prints
• Profiles functions, including:
- Alignment (such as skew)
- Fold Adjustment; this feature is displayed if the optional finisher is attached
- Finishing Devices: This option is available only if an optional, third-party,
Document Finishing Architecture (DFA) device is attached to your system. This
feature allows you to choose specific settings for that attached DFA device.
Xerox
®
Versant™ 2100 Press1-2
System Administration Guide
System Administrator Overview