Xerox Versant 2100 Press - Security Settings; SSL;TLS Settings; Ipsec Settings; IEEE 802.1 X Settings

Security Settings
SSL/TLS Settings
If this feature is enabled, data between the press and networked computers can be
encrypted using HTTP.
Use the following procedure to access and change the SSL/TLS Settings:
1. From the System Settings screen, select Connectivity & Network Setup and then
select Security Settings.
2. Select SSL/TLS Settings.
3. Select the item to be set or changed, and select Change Settings.
4. Select the desired setting or enter the desired value.
5. Press Save.
6. Press Close to return to the Security Settings screen.
IPSec Settings
Use the following procedure to access and change the IPSec Settings:
1. From the Security Settings screen, select IPSec Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
IEEE 802.1X Settings
Use the following procedure to access and change the IEEE 802.1X Settings:
1. From the Security Settings screen, select IEEE 802.1X Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
5-5Xerox
®
Versant™ 2100 Press
System Administration Guide
Connectivity & Network Setup