Xerox Versant 2100 Press - Plug-In Settings; Other Settings

3. From the screen that displays, select the Tools icon.
4. Select System Settings > Common Service Settings.
5. Select Maintenance.
The Maintenance screen displays.
6. To initialize the press hard disk, select Initialize Hard Disk.
a) From the Initialize Hard Disk screen, select the partition to be reformatted.
b) Select Start.
c) Select Yes.
When reformatting completes successfully, a message screen appears.
d) Select Confirm.
e) Select Close to return to the Maintenance screen.
7. To delete the press data, select Delete All Data.
a) From the Delete All Data screen, select Start.
Important
Do not use this function unless authorized and have checked with the Xerox Service
Representative. Selecting Start deletes all data recorded in the press. This includes
all user settings, and data recorded automatically by the system.
b) Upon completion, select Close to return Maintenance screen.
8. Select Close.
The main Tools screen displays.
9. Exit the administrator mode.
Plug-in Settings
1. Select Plug-in Settings.
2. Select either Embedded Plug-ins or select from a List of Embedded Plug-ins.
Other Settings
Use this feature to assign a variety of settings for commonly used features; options
include the following:
Xerox
®
Versant™ 2100 Press6-20
System Administration Guide
Common Service Settings