EasyManua.ls Logo

Xerox Versant 2100 Press - Audit Log; Enabling Audit Log; Saving an Audit Log; Interpreting the Audit Log

Xerox Versant 2100 Press
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The allowable range of 0 to 32 corresponds to the 32-bit binary number comprising
IP addresses. A number of 8, for example, represents a Class A address (mask of
255.0.0.0). The number 16 represents a Class B address (mask of 255.255.0.0). The
number 24 represents a Class C address (mask of 255.255.255.0).
6. Refresh your browser and navigate back to the IP Filtering page. Under IP Filter Rule
List, select the rule that you just created.
7. Select your rule in the list, and click Apply.
8. Click Edit or Delete to edit or delete an existing rule.
Audit Log
When the Audit Log feature is enabled, the system begins recording events that happen
on the press. You can download the Audit Log as a tab-delimited text file, and review it
to find security breaches and assess press security.
Enabling Audit Log
Note
Secure HTTP (SSL) must be enabled before you can enable Audit Log.
1. In CentreWare Internet Services, click Properties > Security > Audit Log.
2. Next to Audit Log, select Enabled.
3. Click Apply to accept the changes or Undo to retain the previous settings.
Saving an Audit Log
1. In CentreWare Internet Services, click Properties > Security > Audit Log.
2. Under Export Audit Log, right-click the Export as text file link and save the compressed
auditfile.txt file to your computer.
3. Open the file in an application that can read a tab-delimited text file.
Interpreting the Audit Log
The Audit Log is formatted into columns
Log ID: A unique value that identifies the event.
Date: The date that the event happened in mm/dd/yy format.
Time: The time that the event happened in hh:mm:ss format.
Audit Event ID: The type of event. The number corresponds to a unique description.
Logged Events: An abbreviated description of the type of event.
Description: More information about the Logged Event. When the Logged Event is
System Status for example, one of the following may be displayed:
- Started normally (cold boot)
- Started normally (warm boot)
- Shutdown requested
3-25Xerox
®
Versant 2100 Press
System Administration Guide
Using CentreWare® Internet Services

Table of Contents

Other manuals for Xerox Versant 2100 Press

Related product manuals