Xerox WorkCentre 3345

3. Push the duplex unit back into the printer.
Note: Ensure that the duplex unit is fully pushed in.
TTrroouubblleesshhoooottiinngg PPaappeerr JJaammss
MMuullttiippllee SShheeeettss PPuulllleedd TTooggeetthheerr
Probable Causes Solutions
The paper tray is too full. Remove some of the paper. Do not load paper past
the fill line.
The edges of the paper are not even. Remove the paper, align the edges, then reload it.
The paper is moist from humidity. Remove the paper from the tray, then replace it with
new dry paper.
Too much static electricity is present. Try a new ream of paper.
Do not fan transparencies before loading them in
tray.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
185
Troubleshooting