EasyManuals Logo

Xerox WorkCentre 5021 User Manual

Xerox WorkCentre 5021
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Before using the machine
WorkCentre 5019/5021
User Guide
1-6
To avoid the risk of electric shock and fire, use only the power cord supplied with this product or a
cord designated by Xerox.
The power cord is for use with this product exclusively. Do not use it with any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat and
eventually cause electric shock or fire.
If the power cord is damaged or insulated wires are exposed, contact your local Xerox representative
for a replacement. Do not use a damaged or uninsulated cord to avoid the risk of electric shock and
fire.
CAUTIONS:
When cleaning this product, always switch off and unplug it. Access to a live machine interior may
cause electric shock.
Do not plug in or unplug this product with the switch in the On position. Plugging and unplugging
a live connector may deform the plug and generate heat, and eventually cause a fire.
Hold the plug, not the cord, when unplugging this product, or it may damage the cord and cause
electric shock or fire.
Always switch off and unplug the machine when it is not used over weekends or long holidays.
Failure to do so may cause deterioration of the insulation and eventually electric shock or fire.
Once a month, switch off this product and check the following:
the power cord is plugged firmly into an electrical outlet
the plug is not excessively heated, rusted or bent
the plug and electrical outlet are free of dust
the power cord is not cracked or worn down
If you notice any unusual condition, switch off and unplug this product first and contact your local
Xerox representative.
Machine installation
WARNING: Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric shock or a fire
accident.
CAUTIONS:
Never locate this product in the following places:
Near radiators or any other heat sources
Near volatile flammable materials such as curtains
In the hot, humid, dusty or poorly ventilated environment
In the place receiving direct sunlight
Near cookers or humidifiers
This product weighs 79.4 lbs./36 kg (Document Feeder Model). Always use a team of two persons
to avoid mishandling or injury when lifting this product: one to hold the bottom of the folded

Table of Contents

Other manuals for Xerox WorkCentre 5021

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 5021 and is the answer not in the manual?

Xerox WorkCentre 5021 Specifications

General IconGeneral
Print TechnologyLaser
Print SpeedUp to 20 ppm
Copy SpeedUp to 20 cpm
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Paper Capacity250 sheets
Monthly Duty CycleUp to 20, 000 pages
ConnectivityUSB 2.0
FunctionsPrint, Copy, Scan
Maximum Paper SizeA3
Duplex PrintingManual
Memory128 MB
Fax Transmission Speed33.6 Kbps (optional)
Operating System CompatibilityWindows, Mac
Print Resolution600 x 600 dpi

Related product manuals