Loading paper
WorkCentre 5019/5021
User Guide
4-6
Unusable paper
Using paper not recommended by Xerox may cause a paper jam or machine malfunction. Use paper
recommended by Xerox.
Storing and handling paper
Please keep the following points in mind when storing paper
• Store paper inside a cabinet or other dry place. Paper that has absorbed moisture can result in
paper jams and lower image quality.
• After opening a package of paper, wrap and store any remaining paper. We recommend that you
store remaining paper in moisture prevention packets.
• Store paper on a flat surface to prevent bends or warping.
Please adhere to the following points when loading paper in a tray
• Align the stack of paper neatly before loading it in a tray.
• Do not use creased or wrinkled paper.
• Do not use warped or curled paper.
• Do not load paper of mixed sizes together into a tray.
• Take care not to touch the print side. Oils from your skin could adhere to the print media, which
could affect printing quality. If unavoidable, be sure to use a finger cot, gloves, or other means to
cover your fingers before touching the print media.
• LEF is recommended for heavyweight media feeds from the Bypass tray. If a misfeed occurs,
please apply an intentional upper curl to the leading edge of the paper.
Star (Package: Orange) 70 Plain —
Star 80 Plain —
Paper name
Basis weight
(gsm)
Paper
type
Notes/countermeasure
To Next Page
Loading...
Need help?
General
