Xerox WorkCentre 5021 User Manual

Appendix
WorkCentre 5019/5021
User Guide
12-9
2-sided printing
When performing 2-sided printing with the machine that the duplex output unit is not installed, it
prints only one side. In this case, the orientation of prints may not be the same as expected.
Error codes
The error "E-1" occurs besides a paper jam when the paper size setting is not correctly specified. Refer
to the Error Code "C-7" and check paper size setting. Refer to Error codes on page 11-21.
Notes and restrictions on the use of the Scan feature
This section describes notes and restrictions to observe when using the Scan feature.
For the notes and restrictions on the scan driver, see the "Readme" information on the CD-ROM for the
Driver CD Kit that came with the machine.
Restriction on scanning capacity
The maximum scanning capacity for one page is 297 × 432 mm. For standard sizes, A3 or 11 × 17
inches.

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi