WorkCentre 5019/5021
User Guide
6-1
6
Scan
Scanning procedure
The basic flow of scan operations, including placing the document in the machine and setting advance
settings, is detailed below.
Notes
• The machine supports the scan feature using the USB connection
• The monochrome binary scan only.
Placing the document
The following two methods are available to load documents.
Document feeder
•Single sheet
• Multiple sheets
Document glass
•Single sheet
• Bound documents, such as books
Note The document feeder is not available for some models. An optional component is required.
Contact your local Xerox representative.
Document feeder
Supported document sizes
You can place documents of the standard sizes in the document feeder.
When a document is placed in the document feeder, the machine detects the document size
automatically. The following standard size documents are detected automatically: A5 , A4 , A4 ,
To Next Page
Loading...
