Xerox WorkCentre 5021 User Manual

Before using the machine
WorkCentre 5019/5021
User Guide
1-11
Regulations
Radio frequency emissions (Class A)
This product has been tested and found to comply with the limits for a class A digital device, pursuant
to International Standard for Electromagnetic Interference (CISPR Publ. 22) and Radiocommunication
Act 1992 in Australia/New Zealand. These limits are designed to provide reasonable protection against
harmful interference when the product is operated in a commercial environment. This product
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the customer documentation, may cause harmful interference to radio communications.
Operation of this product in a residential area is likely to cause harmful interference in which case the
user is required to correct the interference at their own expense.
Changes and modifications to this product not specifically approved by Xerox may void the user's
authority to operate this equipment.
Product safety certification (UL, CB)
This product is certified by the following agency using the safety standards listed.
Agency: TUV
Standard: IEC60950-1:ed. 2

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi