Xerox WorkCentre 5021 User Manual

Maintenance
WorkCentre 5019/5021
User Guide
10-11
To ensure clean copies at all times, clean the document presser and narrow glass strip about once a
month.
CAUTIONS:
• Do not use benzene, paint thinner, or other organic solvents. Doing so might damage the
paint or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying or scanning.
1. Wipe the document presser with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
• Do not press the film with excessive force as it can be easily damaged.
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document presser with a soft cloth
moistened with a small amount of neutral detergent.
2. Wipe the narrow glass strip with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft dry cloth.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the narrow glass strip with a soft cloth
moistened with a small amount of neutral detergent.

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi