Xerox WorkCentre 5021 User Manual

Problem solving
WorkCentre 5019/5021
User Guide
11-37
4. Close the document feeder's inner cover.
5. Close the document feeder cover until it clicks into place, and confirm that there is no space
between the near or far side of the cover and the document feeder.
6. If you cannot find the document, carefully lift up the document feeder. If you find the document,
remove it, then close the document feeder.
7. If you cannot find the document in Step 6, lift up the document feeder tray and remove the
document.
8. Carefully move the document feeder tray back into position.
9. Make sure that the document is not torn, wrinkled, or folded, and then reload the documents that
have not been copied or scanned.
Note Torn, wrinkled or folded document pages can cause document jams or damage. Always copy
torn, wrinkled or folded documents by placing them directly on the document glass.
10. For copying, press the Start button.
For scanning, operate your computer to restart scanning.

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi