Xerox WorkCentre 5021 User Manual

Loading paper
WorkCentre 5019/5021
User Guide
4-12
4. While pinching the two paper guide levers, move them to the edges of the paper.
5. Load the paper with the side to copy or print on facing up. Align the leading edge of the paper
with the left side of the tray.
Note Do not load paper above the maximum fill line. Doing so could cause paper jams or
machine malfunctions.
6. Push the tray in gently until it stops.
Notes
• When pushing the tray in, do it slowly. Pushing the tray with too much force could cause
machine malfunctions.
• Affix the paper size label to the front of the tray.
7. Set the paper size setting.
Refer to Setting the paper size on page 4-13.

Xerox WorkCentre 5021 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	250 sheets
Monthly Duty Cycle	Up to 20, 000 pages
Connectivity	USB 2.0
Functions	Print, Copy, Scan
Maximum Paper Size	A3
Duplex Printing	Manual
Memory	128 MB
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac
Print Resolution	600 x 600 dpi