Safety
Operators
must
be properly trained
A
and qualified
to
operate
this
specific
vehicle.
Know
the
location, learn
the
specific
purpose, and
demonstrate
safe and
proper
use
of
all controls,
instruments,
indicator
lights, and safety and
instruction
labels. Safety is
your
responsibility.
To
prevent
injury
or
death
the
opera-
A
tor
must
be seated
with
seat belt fas-
tened,
the
travel select lever
set
to
NEUTRAL, the parking brake
switch
ON (engaged),
the
service
brake
applied, and the area free
of
people and
obstruc-
tions
BEFORE starting
the
vehicle.
L...-
__
O_peration
Safe~~~_-.J
ADANGER
~
Injury
or
death by electrocution can
result
from
contact with
or
inade-
-
_
quate
clearance
with
energized
power
lines
or
apparatus.
• NEVER operate
the
vehicle in an area where
active overhead
power
lines, overhead
or
underground
cables,
or
other
power
sources
exist.
• Contact the appropriate
power
or
utility
com-
pany
to
de-energize
power
lines
or
take
other
suitable precautions.
it
Keep
the
vehicle, attachments, and
loads
a.
safe distance
from
electrical
power
lInes.
• Remain at least 10 feet
(3
meters),
plus
an
additional 0.4 inches (10 millimeters)
for
each
1,000 Volts
over
50,000 Volts,
from
active
power lines and
other
power
sources.
• Worksite operating directives and/or local
or
state codes
might
require a greater distance.
•
Know
the maximum
height
and reach
of
this
reach
forklift.
Xtreme Manufacturing
10
ADANGER
~
Use
of
the frame sway
control
with
the
boom
raised
above
horizontal
can
L/
cause
tip
over
resulting in death
or
~
injury. Always use
the
frame sway
control
to
level the vehicle BEFORE
raising the boom above horizontal.
If
the vehicle
cannot
be leveled using
the
frame sway control,
do
not
attempt
to
raise
or
place load. Reposition
vehicle
or
have the surface leveled.
•
To
prevent property damage, injury,
or
~
death the operator
must
be seated
with
seat belt fastened, arms, legs,
and
head
completely
inside
the
Rollover Protection Structure/Falling
Object Protection Structure (ROPS/FOPS), the
travel
select
lever
in NEUTRAL, the parking
brake
switch
ON
(engaged), and the service
brakes applied BEFORE starting
the
vehicle.
• The
seat
belt MUST be
worn
while
operating
the vehicle. Failure
to
wear the seat belt could
result in
injury
or
death.
•
DO
NOT
adjust
the seat
or
seat
belt
~
while
the vehicle is moving. Keep
both hands on the wheel while the
vehicle is
moving
to
prevent loss
of
vehicle
control
which
could result
in
injury
or
death.
lP
Never
try
to
escape
the
vehicle
if
it
""
becomes unstable. Learn and prac-
tice
these safety procedures
to
pro-
tect
yourself
from
a roll
over
or
tip
over
incident:
• Remain securely fastened in
the
seat belt.
• Keep
your
head, body, and
limbs
within
the
ROPS/FOPS structure.
• Brace
yourself
and
hold
on firmly.
• Lean away
from
the
point
of
impact.
• Stay on
the
vehicle and ride
out
the roll
over
or
tip
over.
800-497-1704
To Next Page
Loading...
Need help?
General
