Safety
Safety Disclaimer
Thin
Figure
2-1.
Think Safety.
Xtreme Manufacturing reserves the
right
to
make
technical
changes
for
product
improvement.
This manual may contain illustrations and photo-
graphs,
for
demonstration
purposes,
which
slightly
deviate from
the
actual product.
Safety information provided in
this
manual is a
basic guide and
an
attempt
to
prevent accidents.
Xtreme Manufacturing cannot anticipate every
circumstance that
might
involve a potential haz-
ard. Warnings in
this
manual and on
the
vehicle
are NOT all-inclusive.
You are responsible
for
safe operation
of
the
vehicle and all attachments. You
must
satisfy
yourself
that the techniques, operating proce-
dures,
work
methods,
or
tools
you use are safe;
especially those NOT SPECIFICALLY mentioned
by Xtreme Manufacturing.
The
safety
of
everyone
around
the
vehicle
depends
significantly
on
your
knowledge and
understanding
of
all correct and safe operating
practices and procedures. You can help prevent
accidents by remaining alert and recognizing
potentially hazardous situations.
Follow
State and Federal health and safety rules
and/or local regulations
for
operating and main-
taining
the
vehicle.
• This manual does
not
replace any laws and
regulations.
• The operator and the vehicle are required
to
comply
with all applicable laws and regula-
tions.
Xtreme Manufacturing
4
Signal Words
Signal words are the word
or
words
that call
attention
to
the
safety
sign
and designate a
degree
or
level
of
hazard seriousness. The
sig-
nal
words
used in
this
manual are DANGER,
WARNING, and CAUTION.
ADANGER
DANGER indicates
an
imminently hazardous
sit-
uation which,
if
not
avoided,
will
result in death
or
serious injury.
~
7\-'Y';"~11~~f'f"T;.'r
-
.~~
-'-'--~~~'
WARNING indicates a potentially hazardous
situ-
ation which,
if
not
avoided,
could
result
in death
or
serious injury.
ACAUTION
CAUTION indicates a potentially hazardous
situ-
ation which,
if
not
avoided, could
result
in
minor
or
moderate injury.
CAUTION
CAUTION used
without
the
safety alert
symbol
indicates
a
potentially
hazardous
situation
which,
if
not
avoided, may result in property
damage.
"--_....;;S:;.:a::..;fe;,;:~,
Symbols
Safety
symbols
are provided
to
remind the oper-
ator
of
hazardous
situations.
Xtreme
Manufacturing provides these
symbols
in
an
attempt
to
inform all operators, regardless
of
reading and language skills,
of
as many potential
hazards as possible. These
symbols
cover
many,
but
not
all, potential dangers and hazards
associated with operating the vehicle.
Make safety a high priority while operating the
vehicle. Learn and
follow
all safety messages in
this
manual and on vehicle decals
to
prevent
eqUipment damage, injury,
or
death.
800-497-1704
To Next Page
Loading...
Need help?
General
