3500 Series Flat Panel Industrial PC
84
3510/3512 Chemical Compatibility
Chemical
Class
Effects
Acids No effect under most common conditions of concentration and
temperature.
Alcohols Generally compatible at low concentration and room temperature.
Higher concentrations and elevated temperatures result in etching
and attack evidenced by decomposition.
Alkalis Generally compatible at low concentration and room temperature.
Higher concentrations and elevated temperatures result in etching
and attack evidenced by decomposition.
Aliphatic
Hydrocarbons
Generally compatible
Amines Surface crystallization and chemical attack. Avoid.
Aromatic
Hydrocarbons
Partial solvents and severe stress cracking agents. Avoid.
Detergents
and Cleaners
Mild soap solutions are compatible. Strong alkaline materials should
be avoided.
Esters Causes severe crystallization. Partial solvents. Avoid.
Greases and
Oils
Pure petroleum types generally compatible. Many additives used with
them are not compatible.
Halogenated
Hydrocarbons
Solvents. Avoid.
Ketones Causes severe crystallization and stress cracking. Partial solvents.
Avoid.
Silicone Oil
and Greases
Generally compatible up to 85ºC (185º F). Some contain aromatic
hydrocarbons which should be avoided.
Compatible Lubricants
The following table lists known compatible lubricants and the manufacturer’s names.
If you want to use a lubricant that is not listed below, contact the appropriate
manufacturer for compatibility.
3500 Compatible Lubricants
Lubricants Manufacturer
DC® 230
Molykote® 33
Dow Corning
Midland, MI 48640
(800) 248-2345
Harmony® 68
Security® 68
Gulf Oil
Petroleum Prod. Dept.
Pittsburgh, PA 15230
(412) 655-6247
Lubriplate®
Aero
Fisher Bros. Refinery
129 Lockwood Street
Newark, NJ 07105
To Next Page
Loading...
