3500 Flat Panel Industrial PCs
44
Touchscreen Drivers
If you have a touchscreen factory installed, you will also receive at no charge: MS-
DOS, and Windows 95 touchscreen drivers on diskette. Touchscreen drivers for
Windows NT (9460-DRVNT) and OS/2 (9460-DRVOS/2) must be purchased
separately.
The Windows 95 touchscreen driver is available in a COM2 and a mouse port
version. Windows NT touchscreen driver is only available in a version for COM2
Note
If you order Windows NT pre-loaded on a system, the Windows NT touchscreen
drivers are provided.
You must install the corresponding touchscreen driver software if you change the
operating system. Refer to the touchscreen manual for instructions.
Note
If you ordered Windows 95 and a touchscreen on your system, the touchscreen driver
has been installed. If you ordered Windows NT, the driver is on diskette and a copy
of the driver file is on the hard drive. Windows NT only supports COM2. Therefore,
the touchscreen will be on the COM2 port and COM2 will not be available for other
use.
Miscellaneous Drivers
Refer to your operating system and peripheral manuals for information on installing
drivers related to these items.
Note
If you had Windows NT preloaded on your system, you may have to purchase and
install an external parallel port CD-ROM drive, or order your system with CD-ROM
drive to install Windows NT drivers. The Windows NT operating system only ships
on CD-ROM.
To Next Page
Loading...
