Xycom 3510T - Chapter 1 - Introduction; Product Overview; Standard Features

Chapter One - Introduction
9
Chapter 1 - Introduction
Product Overview
The 3500 series Flat-Panel Industrial Computers combine an Intel Celeron or
Pentium III processor with a flat-panel display to offer a powerful, compact
package for the factory floor and other harsh environments. The PC features an open
architecture to meet a wide variety of applications that require both a powerful PC
and a durable industrial enclosure.
The 3500 systems include:
• A three-slot ISA/PCI backplane which accommodates ¾ length expansion cards
• Flat panel displays
• 3510 – 10.4” – 640x480 VGA (TFT)
• 3512 – 12.1” – 800x600 SVGA (TFT)
• 3535 – 15” – 1024x768 XGA (TFT)
• Touchscreen versions 3510T/3512T/3535T
• Keypad version (3510KP/3512KP/3535KPM)
• Keypad and touchscreen units (3510KPT/3512KPT/3535KPMT)
• Hard disk drive facilities
The front panel of the unit is sealed to NEMA 4/4X/12 and IP65 standards, and is
protected by an impact-resistant shield.
The system’s modular design allows easy access to expansion boards, switches,
power supply, flat-panel display, and disk drives.
Standard Features
The 3500 3-slot series ships standard with the following:
• Intel Celeron or Pentium III processor
• Up to 512 MB DRAM
• 10 GB hard drive
• 2 Serial ports
• 1 RS-232 or RS-485 port
• 1 Dedicated RS-232
• Reprogrammable keypad or analog resistive touchscreen, or both for operator input
• Two USB ports