Why does my Yamaha CD-C600 sound hum?
- CcgarzaSep 12, 2025
If your Yamaha CD Player is producing a humming sound, ensure the audio cables are securely connected. If the problem persists, the cables may be defective.
Why does my Yamaha CD-C600 sound hum?
If your Yamaha CD Player is producing a humming sound, ensure the audio cables are securely connected. If the problem persists, the cables may be defective.
What to do if Yamaha CD-C600 disc tray does not close completely?
If the disc tray on your Yamaha CD Player does not close completely, a foreign object might be obstructing the tray. Carefully check the disc tray and remove any foreign object.
Frequency range | 10 - 20000 Hz |
---|---|
Signal-to-Noise Ratio (SNR) | 106 dB |
Total Harmonic Distortion (THD) | 0.003 % |
CD-RW playback | Yes |
File type | MP3, WMA |
Device type | HiFi CD player |
Product color | Black |
Dimensions (WxDxH) | 435 x 116 x 405 mm |
Weight | 6200 g |
---|
Information on critical components and replacement requirements.
Procedure to measure leakage current for safety compliance.
Notice regarding chemical content and safety precautions.
Safety precautions for servicing laser components.
Conditions for laser emission during operation and servicing.
Technical specifications of the laser diode used in the unit.
Safety warning regarding live mains voltage on the primary side.
Methods for grounding to prevent ESD damage.
Precautions to take when moving the unit to prevent damage.
Technical specifications for the audio performance.
General specifications like power supply, consumption, and dimensions.
Physical dimensions and included accessories.
Steps to remove the top cover and clamp assembly.
Instructions for removing the disc tray and internal table.
Procedure to remove the front panel unit.
Critical steps for correctly installing the table.
Steps for removing the CM-230B unit.
Instructions for removing the pick-up mechanism unit.
Steps for disassembling the unit for operation checks.
How to enter test mode for fault checking.
Specific instructions for checking PCBs and connections.
Connecting ground points and reconnecting cables.
Key steps in the standard operation flowchart.
Procedures to enter and exit the device's test mode.
List of functions and key codes for test mode operations.
Procedures to activate and exit factory mode.
Key codes and functions available in factory mode.
List of tools, software, and precautions for firmware updates.
Steps to connect and verify firmware versions.
Connecting the unit to a PC for firmware update.
Detailed steps for performing the firmware update.
Steps to set baud rate and erase device memory.
Initiating the firmware writing process.
Verifying firmware and initializing EEPROM after update.
Information on display segments and their assignments.
Visual diagrams of IC pin connections.
Pin assignments and functions for the LC786922 IC.
Detailed pin functions from 63 through 80.
Important notes regarding pin usage and connections.
Overview of the microprocessor's I/O ports and peripheral functions.
Detailed pin functions for Ports 0 through 3.
Detailed pin functions for Ports 7, PWM, UHD, RES, XT, CF.
Overview of the microprocessor's I/O ports.
Summary of peripheral functions available on the microprocessor.
Details on detecting key inputs via the A/D port.
Pin connection diagrams for various integrated circuits.
Block diagrams of analog output and PU mechanism.
Block diagrams of disc tray and control sections.
Block diagram of the power supply circuit.
Schematic diagram for the main board.
Schematic diagram for Operation board 9.
Schematics for PU mechanism and disc tray.
Schematics for power supply and control sections.
Second part of the main schematic diagram.
Schematics for DC/DC converter and buffer.
Schematics related to microprocessor and EEPROM.
Schematic for the remote control interface.
Schematic for Operation board 1.
Schematic for Operation board 2.
Schematic for Operation board 3.
Schematic for Operation board 4.
Schematic for Operation board 5.
Schematic for Operation board 6.
Schematic for Operation board 7.
Schematic for Operation board 8.
Schematic diagram for Operation board 9.
Schematic for Operation board 10.
Schematic for Operation board 11.
Schematic for Operation board 12.
Schematic for Operation board 13.
Schematic for Operation board 14.
List of electrical components with part details.
Explains abbreviations used in the parts list.
List of accessories and service tools.
Circuit schematic of the remote control.
Layout and key codes for the remote control panel.