Need help?Do you have a question about the Yamatake MGG14C and is the answer not in the manual?
General| Power Supply | 24 V DC ±10% |
|---|---|
| Housing Material | Aluminum Alloy |
| Protection Class | IP65 |
| Ambient Temperature | -10°C to +50°C |
| Output Signal | 4-20 mA |
| Accuracy | ±1% of full scale |
| Operating Temperature | -10°C to +50°C |
Essential safety instructions and explanation of safety symbols for device usage.
Details integral and remote configurations of the measurement system.
Details the main components of the converter and their functions.
Details three methods for installing the converter: wall, pipe, and integral.
Considerations for electrical wiring, including power supply and grounding.
Details cable specifications and usage based on fluid conductivity.
Details detector-to-converter connection wiring diagrams.
Guidelines for selecting and installing wiring cables.
Wiring diagrams for current output with and without S-SFC.
Wiring diagram for pulse output, emphasizing voltage and polarity.
Wiring diagrams for contact input and output.
Step-by-step guide for performing zero adjustment using the data setting device.
How to set pulse and analog output behavior during an abnormality.
Identifies common errors, their causes, and solutions for start-up, operation, and messages.
To Next Page
