Yamatake MGG14C - Selecting Current Output Method

4 - 46
Selecting the Current Output Method
Introduction
This is used as a range function with the normal direction double range or
normal/reverse direction double range, to select how to output the 4 - 20 mA
analog output: with either the range switching method or the wider range
method.
Normal direction double range Normal/reverse direction
double range
Default setting
AUTO
Setting the range
Either AUTO or WIDE.
Open the current output
method selection screen by fol-
lowing the steps to enter the
Engineering Mode.
Touch the key once.
Use the and keys to enter
the desired hysteresis value.
Touch the key to move the
cursor to the "#".
1
ScreenProcedureStep
2
3
4
Output
Output
Input
Input
# I. OUT RANGE
AUTO
# I. OUT RANGE
AUTO
# I. OUT RANGE
WIDE
# I. OUT RANGE
WIDE