ENGINE
Disassembling the Engine and Components
12/05
6LY3 Service Manual
5-17
© 2007 Yanmar Marine International
O-Ring Kit
NOTICE: Three Bond
®
liquid gasket products are
the recommended sealants used for assembly.
Before providing service, observe the cautions
below:
1. Build up each sealant bead equally.
2. For bolt holes, apply the sealant to the inside
surface of each hole.
3. Three Bond
®
TB1104 (Gray) or Three Bond
®
TB1102 (Yellow) is used with a gasket. The use
of either of these sealant bonds without a
gasket is not effective.
4. When gaskets are used, do not use sealant
Three Bond
®
TB1212.
Figure 5-1
Figure 5-1
1 – Oil Pan Mating Surface
2 – Inside of Oil Pan
3 – Bead of Three Bond
®
TB1212
4–Outside
Cleaning Agent for Turbocharger
4 L (1 gal) x 4
Special cleaning agent that requires no water, specially
designed for blower of turbocharger and intercooler.
18 L (5 gal) x 1
15 sets: 1,
500 cc (1 pt) x 6
Items Usual Contents Features and Application
Usual Contents Features and Application
Ø1.9 x 2 m: 1
(0.074 x 6.5 ft)
Ø2.4 x 2 m: 1
(0.09 x 6.5 ft)
Ø3.1 x 2 m: 1
(0.122 x 6.5 ft)
Ø3.5 x 2 m: 1
(0.137 x 6.5 ft)
Ø5.7 x 2 m: 1
(0.224 x 6.5 ft)
O-ring of any size can be prepared, whenever required (including
adhesive, release agent, cutter and jig).
(1)
(3)
(4)
(2)
0005770
To Next Page
Loading...
