Startup Procedure and Test Run
4
4.7 Keypad Operation
YASKAWA SIEPC71061753C GA500 Technical Manual 137
4.7 Keypad Operation
◆ Digital character mapping table
The LED keypad shows the digital characters as shown in Table 4.7
Table 4.7 Digital character mapping table
Characters LED Display Characters LED Display Characters LED Display Characters LED Display
0 9 I R
1 A J S
2 B K T
3 C L U
4 D M
*1
V
5 E N W
*1
6 F O X No indication
7 G P Y
8 H Q Z No indication
*1 Shown across two digits.
◆ Show the Monitor
Show the frequency reference screen.
Note:
Push and hold to return to frequency reference screen from any screen.
Use these steps to access menu and check drive operation status.
Figure 4.16 How to Monitor the Parameter Setting Values
◆ Check Modified Parameters
Show the frequency reference screen.
Note:
Push and hold to return to frequency reference screen from any screen.
Use Verify mode to view all parameters that are not at default settings. This is very useful when you replace a
drive. This lets you quickly access and re-edit changed parameters.
To Next Page
Loading...
