Specifications
10
10.9 Peripheral Devices and Options
YASKAWA SIEPC71061753C GA500 Technical Manual 353
Name Model Intended Use Document No.
DeviceNet SI-N3
This option uses the host controller over DeviceNet communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 1114 and later.
TOBPC73060084
SIJPC73060084
Modbus TCP/IP SI-EM3
This option uses the host controller over Modbus TCP/IP communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
TOBPC73060091
SIJPC73060091
MECHATROLINK-II SI-T3
This option uses the host controller over MECHATROLINK-II communication
to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 6108 and later.
TOBPC73060086
SIJPC73060086
MECHATROLINK-III SI-ET3
This option uses the host controller over MECHATROLINK-III
communication to:
• Operate and stop the drive
• Set and view parameters
• Monitor output frequency, output current, and other statuses
Note:
The drive is compatible with option software versions 6202 and later.
TOBPC73060088
SIJPC73060088
To Next Page
Loading...
