YASKAWA iQpump Micro CIMR-PW Series - Page 411

Register No. Contents
00D8H
Option Card Fault Contents
bit 0 Option Compatibility Error (oFA00)
bit 1 Option not properly connected (oFA01)
bit 3 Option Self-diagnostics Error (oFA03)
bit 4 Option Flash Write Mode Error (oFA04)
bit 5 to F Reserved
00FBH
Output Current
<2>
<1> Units are determined by parameter o1-03.
<2> Display is in the following units: BA0001 to BA0018, 2A0001 to 2A0040, and 4A0001 to 4A0023: 0.01 A units.
2A0056 to 2A0069, 4A0031 to 4A0038: 0.1 A units.
<3> The communication error log is stored until the fault is reset.
<4> Depending on the motor used the correct motor pole number must be set to parameter E2-04.
C.10 MEMOBUS/Modbus Data Table
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
411
C
MEMOBUS/Modbus Communications