YASKAWA iQpump1000 - A: INITIALIZATION PARAMETERS

u
Precautionary Notes on External Heatsink (IP00/Open Type Enclosure)
When mounting the drive heatsink out the back of an enclosure, UL compliance requires covering exposed capacitors in the
main circuit to prevent injury to surrounding personnel.
The portion of the external heatsink that projects out can be protected with the enclosure or with the appropriate capacitor
cover after completing drive installation. The drive models listed in Table C.8 require additional protection by means of a
capacitor cover. Order capacitor covers from a Yaskawa representative or directly from the Yaskawa sales department.
Refer to Figure C.9 for a detailed description of the capacitor cover parts.
Table C.8 Capacitor Cover
Drive Model Code Number Model
2A0110 100-061-273 ECAT31875-11
2A0138 100-061-274 ECAT31876-11
2A0169
100-061-275 ECAT31877-11
2A0211
2A0250
100-061-277 ECAT31726-11
2A0312
2A0360
100-061-278 ECAT31698-11
2A0415
4A0058 100-061-273 ECAT31875-11
4A0072 100-061-274 ECAT31876-11
4A0088
100-061-276 ECAT31878-11
4A0103
4A0139
100-061-275 ECAT31877-11
4A0165
4A0208 100-061-277 ECAT31726-11
4A0250
100-061-278 ECAT31698-11
4A0296
4A0362
4A0414 100-061-279 ECAT31740-11
4A0515
100-061-280 ECAT31746-11
4A0675
5A0041
100-061-274 ECAT31876-11
5A0052
5A0062
100-061-275 ECAT31877-11
5A0077
5A0099
5A0125
100-061-277 ECAT31726-11
5A0145
5A0192
100-061-278 ECAT31698-11
5A0242
<1> Requires two sets.
C.2 UL and CSA Standards
YASKAWA TOEP YAIP1W 01A YASKAWA AC Drive - iQpump1000 Quick Start Guide
351
C
Standards Compliance