YASKAWA MOTOMAN-ES200RD II - Shipping Bolts and Brackets

2-3
170625-1CD
HW1482737
ES200RD II
2 Transport
2.2 Shipping Bolts and Brackets
2.2 Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets at position
and hexagon socket head cap screws . (See Fig. 2-1 “Transporting
Position”.)
Fig. 2-2: Shipping Bolts and Brackets
• The shipping bracket A is painted yellow.
Position Screw Type Pcs
Hexagon socket head cap screw M20
(length:70 mm)
(Tensile strength: 1200 N/mm
2
)
Spring washer M20
Washer M20
Collar HW9405875-4
8
8
16
8
Hexagon socket head cap screw M20
(length:60 mm)
(Tensile strength: 1200 N/mm
2
)
Hexagon nut M20
2
2
Hexagon socket head cap screw M16
(length:20 mm)
(Tensile strength: 1200 N/mm
2
)
2
NOTE
Before turning ON the power, check to be sure that the
shipping bolts and brackets are removed. The shipping
bolts and brackets then must be stored for future use, in the
event that the manipulator must be moved again.
A
B
B
A
Electrical tape painted yellow
Rubber plate
Shipping bracket
Hexagon socket head cap screw
Front view
Side view
1
2
3
17 of 100