YASKAWA Motoman MLX200 - 7.2.3 Changing the IP Address of the MLX200 Control Module

7-7
168542-1CD
168542-1CD
MLX200 Software and
Operations
7 Configuration and Maintenance of MLX200 Control Module
7.2 Maintenance and Configuration Operations
Click on the [Execute] button after selecting the “Change Password”
operation and the user will be presented with the Change Password dialog
as shown in Fig.7-9 "Change Password Dialog".
Fig. 7-9: Change Password Dialog
Enter the current password, new password, confirm the new password
once again and then click the [OK] button. This will change the password
for the MLX200 Control Module.
7.2.3 Changing the IP Address of the MLX200 Control Module
In certain situations, it might be necessary to change the IP Address of the
MLX200 Control Module. This might be necessary if the default IP
address - 192.168.1.200 - is not usable. The IP Address can be changed
using the following procedure. Click on the “Settings” category in the
{Maintenance} screen and select “Change IP Address” from the list of
operations as shown in Fig.7-10 "Selecting the Change IP Address
Operation".
Fig. 7-10: Selecting the Change IP Address Operation
130 of 206