7 Configuration and Maintenance of MLX200 Control Module
7.2 Maintenance and Configuration Operations
7-18
168542-1CD
168542-1CD
MLX200 Software and
Operations
7.2.9.2 Manually Starting MLX-R.exe After Auto-start is Disabled
In situations where the automatic restart of MLX-R.exe is disabled for
troubleshooting purposes, it may be necessary manually start MLX-R.exe.
This can be done by clicking on the “Settings” category on the left side of
the {Maintenance Operations} screen, selecting “Start MLX-R.exe”
operation and clicking on the [Execute] button as shown in Fig.7-27
"Manually Starting MLX-R.exe After its Automatic Restart is Disabled".
Fig. 7-27: Manually Starting MLX-R.exe After its Automatic Restart is
Disabled
To Next Page
Loading...
