2 System Configuration
2.1 MLX200 Control Module
2-5
168542-1CD
168542-1CD
MLX200 Software and
Operations
2 System Configuration
This section of the guide will provide simple steps for connecting and
configuring each component in the MLX200 system.
2.1 MLX200 Control Module
The MLX200 Control Module will come attached to the MLX200 Drive
Panel. The module comes with two RJ-45 ports (Fig.2-1 "Ethernet Ports")
that are used for EtherCAT and Ethernet communications. The module
can be powered on by turning on power to the Drive Panel (Fig.2-2
"Power Indicators"). Table 2-1 "MLX200 Control Module LED Indicators"
on page 2-6 shows the LED indicators on the MLX Control Module.
Fig. 2-1: Ethernet Ports
Fig. 2-2: Power Indicators
To Next Page
Loading...
