3. Use the browse button "Ref." to retrieve the parameter file (.mgf) created by
Yaskawa Europe GmbH.
4. Select the parameter file (.mgf) provided by Yaskawa Europe GmbH and click
"Open". The parameter file information is displayed.
ð
Make sure that the parameter file information of the installed motor is displayed.
Click “Next” to prepare writing the parameters.
Sigma-5 and Sigma-7 Series SERVOPACKs
Set-up Procedure
Feedback Option Module Set-up
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en | 65
To Next Page
Loading...
