Protective and Diagnostic Functions
7-11
Copy
ID does not match
The Inverter product code or software
number is different.
Use the copy function for the same
product code and software number
only.
Inverter capacity
does not match
The capacity of the Inverter being
copied and the capacity stored in the
Digital Operator are different.
Use the copy function for the same
Inverter capacity only.
Control method
matched
The control method of the Inverter
being copied and the control method
in the Digital Operator are different.
Use the copy function for the same
control method only.
Verify error
The constant written to the Inverter
was compared with the constant in the
Digital Operator and they were differ-
ent.
Retry the copy.
Checksum error
The checksum in the Inverter constant
area was compared with the checksum
in the Digital Operator constant area
and they were different.
Retry the copy.
Verify Verify error
The settings in the operator and the
inverter do not match.
–
Table 7.5 Errors during Copy Function
Func-
tion
Display Meaning Probable causes Corrective Actions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General