7
-20
* 1. Refer to MECHATROLINK COMMUNICATIONS INTERFACE CARD INSTRUCTIONS (TOBPC73060008) for details.
* 2. For details on replacement, refer to Chapter 8 Maintenance and Inspection
LT-C
(blinking)
C
Mainte-
nance
Electrolytic Capacitor Maintenance
Timer
Monitor U1-61 has reached 100%.
The electrolytic capacitors have
reached their estimated maintenance
time period.
Reset constant o2-18 to “0%” after
replacing
*2
the electrolytic capaci-
tors.
LT-F
(blinking)
Fan
Mainte-
nance
Cooling Fan Maintenance Timer
Monitor U1-63 has reached 100%.
The cooling fan has reached its esti-
mated maintenance time period.
Replace the cooling fan
*2
and set
constant o2-10 to “0H”.
Table 7.3 Alarm Displays and Processing (Continued)
Display Meaning Probable causes Corrective Actions
TOE-S616-60.1.book 20 ページ ２０１７年８月４日 金曜日 午後３時４１分
To Next Page
Loading...
