YASKAWA Varispeed G7 Series User Manual

2 -38
Installing and Wiring Option Boards
 Option Board Models and Specifications
Up to three option boards can be mounted in the Inverter. You can mount up one Board into each of the three
places on the control board (A, C, and D) shown in Fig 2.21.
Table 2.14 lists the type of option boards and their specifications.
Table 2.14 Option Board Specifications
Board Model Specifications
Mounting
Location
PG Speed Control Boards
PG-A2 Serial open-collector/complimentary inputs A
PG-B2 Phase A/B complimentary inputs A
PG-D2 Single line-driver inputs A
PG-X2 Phase A/B line-driver inputs A
Speed Reference Boards
AI-14U
Input signal levels
0 to 10 V DC (20 kΩ), 1 channel
4 to 20 mA (250 Ω), 1 channel
Input resolution: 14-bit
C
AI-14B
Input signal levels
0 to 10 V DC (20 kΩ)
4 to 20 mA (250 Ω), 3 channels
Input resolution: 13-bit with sign bit
C
DI-08 8-bit digital speed reference setting C
DI-16H2 16-bit digital speed reference setting C
DeviceNet Communications
Board
SI-N1 DeviceNet communications support C
Profibus-DP
Communications Board
SI-P1 Profibus-DP communications support C
CC-Link Communications
Board
SI-C CC-Link communications support C
L
ONWORKS
Communications Board
SI-J
L
ONWORKS communications support C
SI-W1
MECHATROLINK
Communication Board
SI-T MECHATROLINK communications support C
Analog Monitor Board
AO-08 8-bit analog outputs, 2 channels D
AO-12 12-bit analog outputs, 2 channels D
Digital Output Board
DO-08 Six photocoupler outputs and 2 relay outputs D
DO-02C 2 relay outputs D
TOE-S616-60.1.book 38 ページ ２０１７年８月４日 金曜日 午後３時４１分

YASKAWA Varispeed G7 Series Specifications

General

Brand	YASKAWA
Model	Varispeed G7 Series
Category	Inverter
Language	English